Skip to content

SBC & Luckfox Lyra Variants

SBC Compatibility

SBC Model Status RAM Options Notes
Luckfox Lyra ✅ Fully Supported 128 MB Primary platform
Luckfox Lyra (SPI NAND) ✅ Supported 128 MB Requires NAND erase
Luckfox Lyra Plus ❓ Unknown 128 MB RK3506-based with Ethernet (untested)
Milk-V Duo 🚧 Planned 64 MB Future support
Milk-V Duo256 🚧 Planned 256 MB Future support
Raspberry Pi Zero ❌ Not Compatible N/A Form factor mismatch
Custom Boards ❓ Unknown Varies Community experiments

Legend:

  • ✅ Fully Supported - Works out of box with official images
  • 🚧 Planned - Under development or planned for future
  • ❓ Unknown - Not tested, may work with modifications
  • ❌ Not Compatible - Known not to work

Luckfox Lyra Variants

Calculinux currently supports the Luckfox Lyra board with 128 MB RAM. View compatibility details by category:

RAM Storage Status Notes
128 MB SD Card Only Recommended Simplest setup
128 MB SPI NAND + SD ✅ Supported Requires NAND erase first

Other Lyra Models

  • Luckfox Lyra Plus: RK3506-based with Ethernet (untested with Calculinux)
  • 256 MB Lyra variants: Would require custom adapter boards due to different pinouts; community members are experimenting with this
Storage Boot Priority Calculinux Support
SD Card Only Primary Recommended - simplest setup
SPI NAND + SD NAND first ✅ Supported after NAND erase

Limited Network Options

The basic Luckfox Lyra has no built-in networking. The Luckfox Lyra Plus with Ethernet would require a custom 3D-printed backplate to access the port and has not been tested with Calculinux. USB WiFi adapters are the only tested networking option.

Connectivity Hardware Required Status Notes
Luckfox Lyra Plus (Ethernet) Custom backplate ❓ Untested Plus model has Ethernet but not tested
USB WiFi USB WiFi adapter (3.3V or powered hub) ✅ Supported Only tested networking option